How To Mount A Tv To Vinyl Siding

Croacka
Chicago Cubs Fan
Denham Springs
Member since December 2008
61345 posts

Mounting a Idiot box outside to a vinyl siding wall

Posted by Croacka on iv/22/15 at ix:43 am

0 0

Google hasn't been much assist. Anyone tackled something like this?

Trying to recollect of how to go along the siding from being crushed

This will be nether a patio cover and then non too likewise worried about leaks, simply likewise don't really desire to cutting a sizable hole

0 0

hogdaddy
LSU Fan
harvey
Member since Feb 2010
5089 posts
Online

0 0

chickman1313
U.s. Fan
Mandeville
Member since Dec 2007
4922 posts

I mounted mine to woods siding, just establish a stud and bolted the mount to it through the siding.

My buddy had vinyl siding and wound up mounting the tv to the ceiling of his covered patio. it has like a ii pes pole, kinda similar a fan, that it hangs from, looks prissy.

0 0

cgrand
New Orleans Pelicans Fan
HAMMOND
Member since Oct 2009
34770 posts
Online

you can mount it on standoffs if y'all want to go on information technology off of the siding

1 0

Ole Geauxt
LSU Fan
KnowLa.
Fellow member since Dec 2007
50870 posts
Online

Just snug up mounting bracket to siding. Won't exist seen and shouldn't be crushed..

0 2

Croacka
Chicago Cubs Fan
Denham Springs
Member since Dec 2008
61345 posts

I thought near mounting information technology to the patio roof besides. That may be my best option

Also considered the standoffs. Just don't want information technology to look bad or screw upwards the siding

0 0

hogdaddy
LSU Fan
harvey
Member since Feb 2010
5089 posts
Online

This is what I used in my backyard. Monoprice $45

This post was edited on 4/22 at 9:51 am

0 0

Croacka
Chicago Cubs Fan
Denham Springs
Member since Dec 2008
61345 posts

I have a similar Monoprice mountain on my indoor TV.

Will probably practise a similar one outside too. Not sure of TV size nonetheless. Depends on what I'1000 confortable hanging on information technology, depending on how I install mount.

0 0

hogdaddy
LSU Fan
harvey
Member since Feb 2010
5089 posts
Online

That why I went with the heavy duty one, and Big Kids(Drunken friends) will like to hang on them.

0 0

jojothetireguy
New Orleans Saints Fan
Live out in Kokosnoot Grove
Fellow member since Jan 2009
10404 posts

i bought this one and it came in yesterday. I volition be mounting it this weekend outside to vinyl siding under my patio. Just make sure to hit the stud and all should be fine. If you don't want the siding to crush i would advise making the hole for the lag screws big enough so the head of the screw goes by the siding that sticks out.

LINK

0 0

TD Sponsor TD Fan
The states
Member since 2001

Give thanks y'all for supporting our sponsors Posted by Site Sponsor online to Anybody

redneck
New Orleans Saints Fan
Los Suenos, Republic of costa rica
Member since Dec 2003
52756 posts

I thought about doing the same above my outside bar but I live on a saltwater canal and shite doesn't concluding outside and then I think I will just settle for bringing the tv downstairs anytime I want to fix on the bar

0 0

weadjust
Member since Aug 2012
13971 posts
Online

Bolt two 2x4s horizontally to the wall studs on height of the vinyl siding using lag bolts. Y'all could put a few washers on the lag bolts underneath the 2x4 if y'all wanted spacers to go on from crushing the vinyl. Then bolt the tv set mount to the 2x4s.

0 0

Motorboat
LSU Fan
At the camp
Member since Oct 2007
21640 posts

not on Vinyl but on forest. Cut the vertical supports to fit the siding. Caulk to fill in gaps. Employ a inexpensive mountain inside the box so you can either beat or cut a pigsty and it will non matter.

0 3

Hammertime
UNO Fan
Volition trade dowsing rod for titties
Member since Jan 2012
43030 posts

Cutting the siding effectually the mountain

0 0

Boats n Hose
LSU Fan
NOLA
Member since Apr 2011
37248 posts

I'd cut holes in the siding where the mount will contact wall and mount to woods behind if it'south under a covered patio.

Worst case, pieces of vinyl siding ares cheap as shite.

0 0

Me4Heisman
USA Fan
Landmass
Member since Aug 2004
5503 posts

I just hung an older 40" on vinyl using a standard mount from harbor freight with no issues. You should have good forest nether the vinyl to attach your woods screws to.

0 0

chalupa
LSU Fan
Fellow member since Jan 2011
6711 posts
Online

Look into a ceiling mount. Something similar this LINK

Mount a 2x4 across the wood frame in your attic and lag commodities it to that. Definitely a 2 human chore.

0 0

rilesrick
Member since Mar 2015
6704 posts

Stud finder Lag Bolts =Golden

2 0

Citica8
LSU Fan
Gonzales, LA
Member since Dec 2012
3441 posts

I similar that, I might go that route when I get around to mine opposed to the wall mountain.

0 0

first page prev page Folio 1 of i next page last page
refresh