banner



How To Use Odin Mode

These are instructions on how to use Odin Downloader Tool to flash or install Stock Firmware (ROM) on whatsoever Samsung Device.

Caution (1): Flashing or installing the Stock Firmware (ROM) using the Odin Tool will wipe out the Personal Data from the device. Therefore, we recommend you accept a backup of your data earlier using the Odin Tool.

Circumspection (ii): Downloading the Right Firmware is very important Stride. Example: If y'all have purchased the Samsung Device from the United states, so you tin can only wink or install the USA version Firmware, or else you will end upwards getting the bootloop on the device.

Wink or install Stock Firmware (ROM) on Samsung Devices

  1. Download and install latest version of Samsung USB Driver on your Calculator (if in case samsung drivers are already installed then SKIP this pace).
  2. USB logo

  3. Download and extract the Stock Firmware (ROM) of your Samsung Device (if you lot accept already downloaded the firmware then SKIP this footstep).
  4. Download Logo

  5. Now, Ability Off your Samsung Device.
  6. Samsung Power Off

  7. At present, you have to kicking your Samsung device into download manner. To Boot into the Download Mode: Press and Hold Volume Downwardly + Home + Ability Button for 6-viii seconds.
  8. Samsung Download Mode

  9. Once you have entered into the download way, you volition run into the warning message on the screen. In this state of affairs, Press Volume UP Key to Go on.
  10. samsung galaxy warning sign

  11. Download and extract the latest version of Odin Downloader on your computer (if you have already downloaded Odin Downloader Tool then SKIP this step). Once Odin Tool is extracted, yous volition be able to see following files:
  12. Odin Files

  13. At present, Open up Odin3.exe File to Launch the Tool:
  14. Odin Open

  15. Connect your Device to the computer using the USB Cablevision.

    Connect Mobile Computer

  16. In one case yous have successfully connected the device to the reckoner, then you will be able to encounter the Added! message in Odin Tool.
  17. Odin Device Added

  18. Now, Click on the AP Push and Locate the Stock Firmware (.md5 or .tar) on your Computer.
  19. Odin AP Button

    Odin Select Tar

  20. Now, Click on Start Button to brainstorm the flashing or installation process.
  21. Odin Start Flashing

  22. Flashing or installation procedure may take upwards to 5-ten minutes to consummate, and once the flashing process is completed, y'all will exist able to see the Green Laissez passer Message. During this process, your device volition restart automatically.
  23. Odin Success

    Congratulations! At present, Shut Odin Tool and Disconnect your Mobile Device from the Figurer.

Readme Once:

[*] Bootloop: If you have installed the Correct Firmware (ROM) on the Samsung Device, but nevertheless facing the bootloop upshot, then y'all may need to boot into the Recovery Card (Press and Agree Volume UP + Home + Ability for 6-8 Seconds) > Wipe the Enshroud/Data > Restart.

[*] Samsung Stock Firmware: If y'all are looking for the Stock Firmware (ROM) and then, head over to Download Samsung Firmware folio.

[*] Samsung Combination: If yous are looking for the Samsung Combination File then, head over to Download Samsung Combination page.

[*] Samsung USB Commuter: If you are looking for the original Samsung USB Commuter and then, head over to Download Samsung USB Driver page.

How To Use Odin Mode,

Source: https://odindownloader.com/tutorials/use-odin-downloader

Posted by: coffeysamot1998.blogspot.com

0 Response to "How To Use Odin Mode"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel